Parts & Accessories
Introduction - Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years. - Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag. Storage - We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP. - As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG. - Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG. Hydration - With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers. Adjustable Mounting - One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation. - In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions. Lightweight - We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams. Bottom Line - The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros! Includes: - Carbon Sonic chassis - One Pair X-Straps - All hardware and instructions Material - Carbon Fiber proprietary unidirectional orientation. Weight - Chassis 49 grams, Hardware 30 grams. Total 79 grams Limited Lifetime Warranty - Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
Introducing XLAB's latest generation of their Torpedo Mount, the Torpedo Mini Mount Carbon. XLAB's Torpedo Mount lets you carry hydration and computers on your aero bars and actually reduces your aero drag, too! The Mini is narrower to accommodate the trend to running aero extension bars closer together, and it's longer to support XLAB's new horizontal Torpedo bottle (sold separately). Plus it offers high adjustability for easy fitting. Best of all, a designated slot up front allows you to position your computer for easy viewing. No more looking down to see your data! Go with the originators of the horizontal bottle mount; choose the experts: XLAB!
Ride with confidence—keep optimal safety in mind with the all-new Impact Protector panel. Ultra-light and supremely flexible to move with the twists and turns of the trail. - CE1621-2 Level 2 Protection Withstands multiple impacts - Designed specifically to be used with select CamelBak hydration packs - Lightweight materials unparalleled protection without the weight penalty - Extremely flexible design contours to back and moves with you for all-day comfort
Update or replace your lumbar reservoir. This 2-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 70-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking. - 2L / 70 oz Dakine x Hydrapak 3D lumbar reservoir - Blaster high-flow bite valve w/shut-off - Quick-disconnect tubing for easier refills - Molded 3D bottom provides better shape inside the pack - Molded 3D bottom for much better drying between rides
The Dakine 3L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
Introducing XLAB's latest generation of their Torpedo Mount, the Torpedo Mini Mount Aluminum. XLAB's Torpedo Mount lets you carry hydration and computers on your aero bars and actually reduces your aero drag, too! The Mini is narrower to accommodate the trend to running aero extension bars closer together, and it's longer to support XLAB's new horizontal Torpedo bottle (sold separately). Plus it offers high adjustability for easy fitting. Best of all, a designated slot up front allows you to position your computer for easy viewing. No more looking down to see your data! Go with the originators of the horizontal bottle mount; choose the experts: XLAB!
- Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in
This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo
B-RAD Everywhere Base 3
• KEEP LIQUIDS COOL - Silver exterior reflects heat away keeping liquids 25% cooler • FULL INSULATION - Bottle (sold separately) is completely covered for maximum insulation • INSULATED STRAW COVER - Keep liquids in straw cool for instant refreshment • EASY INSTALLATION - Simple install and removal for bottle cleaning • FOLDING STRAW ABILITY - Fold straw for optimum aerodynamics • PREMIUM MATERIAL - Full 3mm low-friction smooth skin insulating neoprene • Compatibility: Fits TORPEDO SYSTEM 50, 100 & 400 • Material: Neoprene • Weight: Bottle cover: 41 grams, Straw cover: 10 grams • Includes: Bottle cover, Straw cover, Instructions
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
B-RAD Everywhere Base 2
SaltStick's Mini Dispenser is a unique lightweight water-resistant dispenser that holds up to 3 SaltStick electrolyte capsules so they're always with you and easy to access. The Mini is designed to take the place of your handlebar end plug and fit cleanly inside the bars. It can also be mounted in other places on the bicycle. And, thanks to its custom SaltStick GRIP fastener, it also mounts on race belts and backpacks. The Mini is made of safe food-grade plastic and keeps capsules clean and dry. It offers easy one-handed dispensing by simply rotating the nozzle. Plus, you can carry 2 or more Minis for a total capacity of 6 or more capsules. The Mini Dispenser is a patented design that's totally unique on the marketplace. It's a must-have for any endurance athlete.
XLAB's Aero Cage Optimizer is a cool little device that mounts onto the bottle mounts on your frame or aero-bar or rear hydration system. Once in place, it lets you adjust your cage up, down, forward or backwards up to 1.75 inches so that everything fits and works the way you want it (cages sold separately).
New Crux tube offers 20% more water per sip, and with the insulated thermal sleeve your water stays cooler in warm weather.
The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes
- Saddle rail mounted cages are a great solution for triathletes or anyone looking for more bottle cage options - Model SBH-300 Aluminum adapter clamps to saddle rails for dual bottle cage location behind the saddle, hardware included - Model SBH-80 Steel adapter clamps to saddle rails for single bottle cage location behind the saddle, hardware included
Replacement straps for installing an XLAB Torpedo Mount to your aero bars. Includes four hook-and-loop straps with bar grippers.
Replace that old bite valve! CamelBak's Big Bite Valve mouthpiece slip on easily and add some color to your hydration. And, they're remarkably drip resistant.
Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages. Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)
Keep your water bottles clean and free of mysterious foreign objects. The CamelBak Bottle Brush Kit includes a large brush for scrubbing the inside of your bottle as well as small straw brush for cleaning the straw, cap, and bite valve.
Probably the easiest way to clean your reservoir, CamelBak's Cleaning Tablets work in just five minutes. They prevent bacteria buildup, odor, and get rid of bad taste. One tablet cleans a 100-ounce reservoir.
Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.
Adapter for direct mounting of the Fuel Pack or other equipment with screw connections. Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.
XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
On a lot of frames, the bottle cage mounts just aren’t in the right place. If your bottle cage isn’t playing nice with your other accessories, Problem Solver's height-adjustable adapter might do the trick. With 45mm of fore-to-aft adjustability, you should be able to find the optimal position for your cage. -45mm of adjustability -28 oz water bottles max -Constructed of AL-6061
All metal cup made of 304 Stainless Steel.
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.
CamelBak's Magnetic Tube Trap keeps your hydration hose bite valve right where you need it for hydration on the go. Pull it off, take a sip, and pop it back so it's always where you want it. It fits any CamelBak reservoir hose.
Park Tool's Mini Bottle Opener is made of durable, rustproof stainless steel and has Park's great-to-grip and attractive blue vinyl-coated handle. This handy tool fits on a keychain and has a bottle opener and 10mm open-end wrench built in.
CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.
CamelBak's Big Bite Valve Cover keeps your bite valve clean. Put it on your valve for storage or while traveling and your bite valve will stay just the way you left it.
Fits between cage and frame and allows water bottle cage to twist sideways for easier bottle removal and replacement. Works with most Topeak water bottle cages. - Material: Engineering grade plastic - Size: 7.9 x 2.5 x 1.5 cm / 3.1” x 1” x 0.6” - Weight: 25 grams
$5.95 - $6.95
Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!
CamelBak's Ergo HydroLock controls your fluid flow with the flip of a switch. Turn it on to drink, turn it off for added security during transport. Simply insert it into the end of your CamelBak drinking tube and attach the valve to the other end. Plus, the 90-degree bend makes sipping on the go a cinch!
- Customize your race belt with this lightweight slide on accessory - Holds up to four gel packs - Compatible with all Ergo & Ultralight Belts
- Customize your race belt with our removable micro race locks with quick release clasp - Fully adjustable race bib toggles - Hi-viz reflective accents - Compatible with all Ergo & Ultralight Belts
Page 1 of 1