Tools

- Fits 16"-29" wheels with or without tire - Includes thru-axle hub adapters - Can be easily bench mounted

6- 25L bits w/holder, size: Phillips 1 & 2mm, Slotted 5 & 7mm, Torx 25 & 30mm. 3- 1/4”Dr. socket size:8 /9/10mm 1- Couple 1- L handle 3- Steel core tire levers 2- Hub cone spanner.13*14*15*16mm 1- Crank installation tool 1- Chain rivet extractor chain-shaped.lost-wax casting, for 8, 9, 10 speed chain, with 1 spare pin 1- BB wrench for use Shimano® Hollowtech & Truvativ® GXP® & FSA®, Campagnolo® 1- Freewheel turner(for 9 speed chains) 1- Headset wrench(32*36mm) 1- 15mm pedal wrench and 14*15mm box wrenches 1- Chainring nut wrench.w/crank cover wrench 1- 2 in 1 crank tool.for standard square type & Shimano splined octalink and ISIS 1- Cartridge B.B. tool for Shimano® cartridge B.B. & ISIS drive compatible. 1- B-shaped spoke wrench, size: 3.2/3.3/3.5/4.0 mm 1- Double-ended wrench 8*10mm 6- Hex key wrenches 2/2.5/3/4/5/6mm 1- 8mm hex key & 1/2”Dr. adaptor 1- Freewheel remover 1- Blow case

Great for the Home Mechanic! - Fits 16" to 29" wheels - Plastic gauge to avoid scratches on rim - Folds completely flat for storage/travel and opens in one step

- Includes tap handle and case - 4 pedal taps (.5" and .625", left and right) - 5 frame taps (4/5/6/8/10mm)

Includes the most common size of hub from 13 to 19 mm (TB-HB13~TB-HB19).

- Installs press-fit BB30/86/90

- 1-Freewheel turner for 1/8" fixed gear sprockets. - 1-2 in 1 cotterless crank tool for both standard square type and Shimano octalink - 1-Multi-function pedal wrench, 15 mm pedal wrench with 8 / 10 mm hex wrench. - 1-Freewheel remover for Shimano HG cassettes. - 1-Chain rivet extractor, for 3/32" to 3/16" chains and 8, 9 & 10 speed chains . - 1-B.B. wrench, for Shimano Hollowtech II and other external bottom brackets. - 1-Crank installation tool. - 6-Hex key, size: 2 / 2.5 / 3 / 4 / 5 / 6 mm, with a holder - 1-Patch repair kit, self-adhesive patch x 6, sandpaper x 1. - 1-Spoke wrench, 3.2 / 3.3 / 3.5 mm. - 1-Adaptor 8 mm hex x 1/2" Dr. - 1-Double-ended Torx key, T25. - 3-Tire lever. - 1-Blow case

TB-1938: Crown race setting system includes 1 x setting tube, 3 x 1" inserts and 3 x 1.125" inserts for installing the crown race, used on most 1" x 1.125" headsets TB-1939: Crown race setting system includes 1 x setting tube, 3 x 1" inserts and 3 x 1.125

- Uniqely designed P-handle hex set. - Made of high-grade steel and dual density molded handles. - Bench mount or wall mount with towel holder. - Includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm

- Aluminum construction - Built strong and reliable for any wheel builder at a great price

Designed to align the rear derailleur properly and solve most derailleur shifting problems, especially those with index shifting systems.

To accept wheel hub up to 210 mm in width. (tandem, fat and down hill Bikes)

- Weighs up to 50kg - Designed to hang from repair stand clamp - Batteries not included - 1 year warranty

It is used to center the rim between the locknuts of the hub to insure that a wheel will perform properly. To make precision adjustments, a wheel alignment gauge is a very important tool. It allows simple checking of the central alignment of road, MTB, and BMX wheelsets from 20” to 29”. It works with most widths and could be used with the tire on the wheel.

- 3-step intuitive operation: push the button, put on the cradle and release the button. - Then you can break various chains, including 3/32" to 3/16" and 5 to 12 speed chains. - The cradle holds 4 links to ensure users break / install chain stably when chain is installed on the bike and to avoid damaging the chain.

10 speed cassette compatible

- 2/2.5/3/4/5/6/8 mm hex key wrench - T25 - T30 - PH#1 screwdriver - Chain rivet extractor - Spoke wrench 3.2 / 3.5 / 3.3 / 3.5 mm - Tire lever x 2 - Pin holder

12 notch 46mm OD cup to install and remove SRAM DUB Race Face Cinch or 12 notch external bearing bottom brackets.

Remove BB30 Bearings

- 4-in-1 cable cutter - Cuts cables and housing - Crimps cable ends - Crimps housing end caps

Blade tension adjustable and comfortable handle make it an ideal hacksaw for you. TB-1161: Includes one steel blade 12" (300 mm) to cut metal components.

For 9-10 or 11 speed cassettes.

- Shockless and no rebound - Steel structure and includes steel shot

Remove BB86, BB90 bearings

- Heavy-duty industrial pedal wrench 15 mm. - Unique bending designed for professional mechanics daily use to loosen the bolts on pedal easier. - Extra-long handle (18.5") provides great leverage to remove the stubborn pedals. - Innovative two openings is to remove both side of pedals at different angles and side edge designed to access all wrench flats easily. - Made from heat-treated high grade steel SK5 for hardness and laser cutting for accuracy.

- Heat treated, high grade steel for durable use.

- Innovation design to keep adapters nest neatly inside tool body. - Guides to install inner cable, wires and house inside the frame. - Includes a long cable guider with attached magnets. - Adapters: for hydraulic hose, brake housing and Di2 E-tube cable connector.

- BB wrench for use with Shimano Hollowtech II, Truvativ GXP, and FSA

- Cartridge BB tool for Shimano and ISIS systems

- 4-in-1 cable cutter - Cuts cables and housing - Crimps cable ends - Crimps housing end caps - Housing end reformer in the handle TB-4575