Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Grips

SDG Jr. Pro Kit
$149.99
The industry’s first all-in-one premium youth components upgrade kit, which is ergonomically optimized to enhance performance and ultimate control. - Includes Slater 90 pedals, Slater 650 bar, Slater Jr. grips, and a Fly Jr. saddle - Includes light plastic 22.2 to 19mm shims, located inside the packaging with the instruction manual - Age: Youth - Rail Material: Steel - Clamp Style: Standard Rails - Material: Synthetic - Length: 235mm - Width: 122mm - Weight: 270g
RockShox TwistLoc Full Sprint Remote
$109.00
It’s tough to find space for a remote that looks good and lets the rider maintain full control. Enter TwistLoc: Twist to lock, push the button to unlock. It controls forks, rear shocks, or both simultaneously. With a consistent grip size and light-touch action, TwistLoc maximizes efficiency while keeping your hands safely on the bar. Features - Easy action: Twist to lock, push button to release - Curved "CRVD" and straight "STRT" cable options - Perfect for XC, Trail, and Enduro usage - Fixed grips included
Brooks Plump Leather Grips
$90.00
In the Brooks tradition, these grips are made of natural leather, the same long-wearing leather used for Brooks saddle tops. Each grip is made with a stack of leather washers. These washers are held together by 3 spokes, enabling the grip to be adjusted to the desired length. The standard length of each grip is 130mm, but each grip can be shortened to the desired length independently. The grips are delivered in a box containing shorter 80mm spokes to make them even shorter. - Adjustable Length from 80 mm to 130 mm - Inner Diameter: 22.2 mm - Weight: 290g per Pair
Brooks Slender Grips 130mm & 130mm
$90.00
Brooks Slender Leather Grips feature vegetable-tanned leather tape, and are designed to offer an alternative performance option for the user, while maintaining the standard for sustainability set by the Plump Grips, allowing the user to replace worn parts if necessary. The design incorporates an aluminum shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The leather is then held in place by aluminum and steel clamps which can be removed in the event that the tape requires replacement. The tape is made from the same vegetable-tanned leather used for Brooks Saddles and natural cork. Made in Italy.
Cardiff Blamoral Leather Locking Grips
$56.34
- Classic leather designs with lock-on convenience - Balmoral model has an ergonomic shape and a stitched leather cover
Portland Design Works Bourbon Grips
$45.00
Bring the stylish comfort of a well-worn baseball glove to your ride with Portland Design Works' Bourbon Grips. They're made from classically stitched, vegetable-tanned leather with polished aluminum lockrings for durability and a finish that'll only improve with age. - Durable, high-quality full grain leather - Sturdy machined aluminum alloy lockrings - Fits 22.0-22.2mm handlebars - Weight: 136g (4.8oz) per pair - Length: 130mm (5.1") each - Lifetime PDWarranty
Lizard Skins DSP Bar Tape V2 3.2mm
$44.99
Our thickest bar tape is ideal for your next double century, gravel grinder or cyclocross race. Discover why our Pro Tour teams spec this tape for the Spring Classics.
SQlab 702 Trekking and City Comfort Grip
$42.99
The 702 Trekking and City Comfort Grip features a well thought-out shape with a large supporting wing and outer elevation for hand protection. The 702 is perfect for a comfortable trekking or city bike. The 702-grip’s extra-large wing supports the wrist. Pressure is comfortably and evenly distributed, thanks to a very large surface area. The raised end of the grip nestles against the side of the hand, while the inside is slightly elevated to match the natural position of the hand. As a result, 702 relieves the ulnar nerve, the median nerve, and the carpal tunnel. The clamp is located on the inner side of the grip. This increases the shock absorption and comfort on the hand’s outer side. It is not compatible with twist grips. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. - Weight (g) / pair: 306 - Diameter at Smallest Point (mm): 108, 111, 124 - Material: Proprietary Rubber Blend
SQlab 710 MTB Tour and Travel Grip
$42.99
The 710 Tour and Travel Grip features a well thought-out shape, with the wings pulled down far, making the perfect combination of comfort and driving dynamics. The 710 user is a comfort-oriented mountain biker or a sporty trekking biker. This relief wing, which is located at the very edge and deeply extends downwards, frees up space for securely grasping the grip body in all situations. The raised end of the grip externally nestles against the side of the hand, while the inside is somewhat more elevated. As a result, it specifically relieves the ulnar nerve, the median nerve, and the carpal tunnel. The clamp is located on the inner side of the grip. This increases the shock absorption and comfort on the hand’s outer side. It is not compatible with twist grips. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 238 - Diameter at Smallest Point (mm): 91, 101, 106 - Material: Proprietary Rubber Blend
Lizard Skins DSP Bar Tape V2 2.5mm
$41.99
Balance is the key to optimum performance in a stage race. Experience the perfect blend of grip and comfort that teams AG2R La Mondiale Pro Cycling Team, Lotto Soudal and Movistar Team use to win in the pro peloton.
Brooks Cambium Comfort Grips
$40.00
The Cambium Comfort Grip! Organic cotton canvas is vulcanized and bonded to organic rubber to provide superior comfort and style. 100mm set for use with dual grip shifting systems and handlebars with shorter contact area, such as Brompton "M-Type" handlebars.
Portland Design Works Speed Metal Grips
$40.00
Whether you ride like a thrasher or just kick it around town, the Speed Metal Grips from Portland Design Works will improve your grip and style. The ergonomic metal thumb grooves are extra comfy and the rubber inserts add just the right amount of cushion and grip.
Lizard Skins DSP Bar Tape V2 1.8mm
$39.99
Realize the epitome of grip and control with our thinnest bar tape. Minimal padding allows for maximum feel and handling while carving the corners of your local criterium.
Ergon GP2
$39.95
The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts
SQlab 70X Gravity and E-Performance Grip
$37.99
The 70X Gravity and E-Performance Grip offers the perfect grip ergonomics for experts. The gravity and downhill grip offers maximum control and grip in rough terrain, even in wet and muddy conditions. The special textured zone of the front and bottom side provides optimal support for the fingers. The exterior side ensures the needed comfort. The clamp is located inside and the clamping sleeve at the (inner) third of the grip. This increases the shock absorption and comfort on the hand’s outer side. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. The personal grip size is what matters. With the 7OX grip, the sizes differ in diameter and shape. This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 132, 155 - Diameter at Smallest Point (mm): 97, 101 - Material: Proprietary Rubber Blend
SQlab 711 MTB Tech and Trail Grip
$37.99
The 711 MTB Tech and Trail Grip features perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikes. A well thought-out, highly ergonomic shape offers an especially secure grip and comfort. The outer contact area is less rounded (flattened). The flattened area raises slightly towards the outside for support. Based on the natural contour of the hand on a grip, contact is drawn forward and slightly rearward. The clamp is located inside and the clamping sleeve at the (inner) third of the grip. This increases the shock absorption and comfort on the hand’s outer side. The flat angular bottom offers a perfect form fit. The design organically flows with your palm and fingers providing the ideal interface and optimal cushioning. 711 offers extended pressure distribution and hand support compared to a wing design that supports only the outside of your hand. The grip can be squeezed less tightly because it fits better. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. The end of the grip is closed, so no plugs are needed. As round as necessary and as flat as possible! This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 128, 150, 186 - Diameter at Smallest Point (mm): 91, 101, 106 - Material: Proprietary Rubber Blend
SRAM DoubleTap Lever Hoods
$34.00 - $37.00
Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.
SRAM HydroR Lever Hoods
$37.00
Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.
Fabric XL Grip
$35.00
Fabric's XL lock-on grip is ideal for wider bars. The soft kraton rubber logo increases comfort and a hidden aluminium clamp provides maximum surface area. Their unique 3 shot manufacturing process provides an extra durable, dual density grip. -Diameter: 31mm -Length: 145mm
ODI AG-2 Lock-On Grips
$35.00
Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge
WTB Commander Padloc
$34.95
PadLoc grips use a tapered inner-grip cylinder that interfaces directly with PadLoc-ready handlebars to eliminate rotational slippage entirely. The outside of the grip has a rubberized, forgiving wedge shape that improves comfort and greatly reduces ulnar nerve pressure. You must use PadLoc-ready handlebars, or modify your current handlebars by using the Park Tool saw guide (SGI-7). - 30mm diameter - Length: 102mm - Weight 102g
Chromag Clutch
$34.00
Dimples for the palm, waffle for the fingers. The Clutch grip combines traction and comfort. The waffle tread is specifically shaped to the fingers and oriented for traction in varied conditions. The diameter is narrow at 30mm with an extra wide format at 150mm overall. It features our special tacky compound based on 25a durometer. Weighing in at 100g /pair. Chromag grips feature our unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
Chromag Squareweave XL Grips
$34.00
• Larger diameter model for bigger hands, offers extra cushion • Same bulged center as the original Squareweave • Aluminum clamps secure the grip on both for twist-free performance
SRAM DoubleTap Lever Hoods
$20.00 - $33.00
Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.
ESI Grips Fit SG
$32.99
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. Fit SG grips give you the perfect flat platform with a double step-down ledge for excellent grip while driving through corners and the perfect braking position. The open texture with micro ribs gives you supreme contact. You will want to get your hands on these! - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Fit CR Grips
$32.92
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. CR stands for Chunky, Racer’s Mix. - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ESI Fit XC Grips
$32.92
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. XC stands for Extra Chunky. - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
ODI Aaron Gwin Lock-On MTB Grip
$31.95
- Developed in collaboration with 2x World Cup Champion Aaron Gwin - Ergonomic single clamp design with aluminum reinforced ends - Angled rib pattern matches the articulation points of your hand - Bonus pack includes Lock-On grips and v2.1 clamp
Chromag Basis Grips
$31.00
Chromag's Basis grip is designed for applications where the rider wants a firm, direct connection for performance in high intensity scenarios. The thin diameter grip with dimpled pattern is firm yet tacky and less prone to surface wear. Chromag grips feature their unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
Deity Components Knuckleduster
$21.99 - $29.99
The grip of choice for World Cup-style assassin and gloveless wonder, Sam Blenkinsop, the KNUCKLEDUSTER embodies our attention to detail and our focus on function! Not only have we developed our TRC rubber blend that gives you remarkable grip with incredible durability, the KNUCKLEDUSTER also features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and, coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel in a stunning package. Featuring a mushroom pattern to minimize vibration, the true magic of the KNUCKLEDUSTER lies in the V channel chevron ribs that ergonomically fill the swell of your palm and then seamlessly transition to a recessed half waffle on the underside. Why is this magic? All half waffle patterns are outboard and are notorious for creating hot spots on long rides. By designing the top to seamlessly transition to a recessed half waffle pattern, your fingers sit perfectly into the grip and allow you full control even in the roughest of conditions without being plagued by hot spots or blisters. The KNUCKLEDUSTER grips truly are an "all day grip" that allow you to keep it Pinned Wide Open at all times! - The benchmark in grip design - DIRT MAG Top 100 Product for 2018 - Featuring DEITY TRC rubber compound for exceptional durability - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black-ano 6061-T6 aluminum clamps - Short and wide rib design for added comfort with no side-to-side play - Half-waffle recessed design for added control without hot spots - Chevron v-channel design for your palm swell to give an ergonomic feel - Seamless transition through the end of grip for comfort - 132mm length with 32mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle and DH - 101 grams for the set
Page 1 of 8 Next page